Do you own a pair of boAt Airdopes but are facing problems? Common technical issues like one side not working, pairing problems, connectivity glitches and no audio occurs after using them over a period of time. That’s when the need to reset boAt airdopes comes into the picture.
Today, we are going to explain how to reset boAt Airdopes easily. We will cover the exact steps to reset Airdopes 441, 121v2, 141, 171, 621 or 501 ANC. The resetting process might vary from model to model but they are not completely different. You can complete resetting your Airdopes by reading this guide.
Why Do You Need to Reset Your boAt Airdopes?
- If your earbuds suddenly stop working.
- One of the earbuds is working.
- boAt Airdopes keep losing connection.
- Frequent connection & disconnection.
- Trouble with the pairing process with Laptop/Mobile.
- Airdopes are already paired but not playing music.
- It plays music but doesn’t work during phone calls.
Before Resetting the Airdopes
Before you start the reset process of boAt airdopes, you need to take care of a few things. I have outlined the pre-conditions as follows:
1. Disconnect the Airdopes: Make sure your earbuds are not connected to any nearby Bluetooth devices. You can turn off the Bluetooth of your laptop or smartphone to avoid the auto-pairing process. The airdopes should be in pairing mode.
2. Forget paired devices: If you have paired your boAt airdopes to a laptop or smartphone, you may need to remove the boAt airdopes from the paired devices list. To do this, go to:
Bluetooth settings -> under devices -> Select your boAt airdopes -> Remove -> Confirm.
3. Keep it charged: Make sure your earbuds have at least 20% battery remaining. If it’s fully discharged, you can charge the boAt airdopes from the powercase.
Step-By-Step Process to Reset boAt Airdopes
Now that we are prepared with the reset process of boAt airdopes, the next steps requires you to know which model you’re using. This is because the procedure for resetting boAt earbuds is not the same for each model. We have covered a few models in this guide which are relatively famous.
Resetting boAt Airdopes 441 (& Pro)
Follow the same steps to reset boAt Airdopes 441 Pro.
1. Place the earbuds inside the power case. You may see red & green lights blinking for a second or so.
2. Now, tap the control panel (touch-sensitive) 3 times. Do it gently, for both the earbuds simultaneously. You will see the earbuds’ touch panel blinks altering blue & green light for a few seconds.
3. Now simply close the lid of the powercase.
4. After a while, open the lid again and take the Airdopes out of the case. The reset process is now complete.
5. Turn on the Bluetooth of your smartphone/laptop and start the pairing process. Connect it to your device and try streaming some music and it should work.
How to Reset boAt Airdopes 141?
1. Make sure no device is paired with your boAt airdopes 141.
2. Take the earbuds in your hands (one earbud in one hand). Now, gently tap the touch control panel 5 times continuously. Do it for both airdopes at the same time.
3. As a next step, place the earbuds back inside the charging case. Close the lid & re-open after some time.
4. Congrats! You have successfully reset your Airdopes 141!
How to Reset boAt Airdopes 121v2?
1. Disconnect the 121v2 earbuds and place them inside the powercase.
2. Tap the control panel (touch-sensitive) 3 times. Do it gently, for both the earbuds simultaneously. You will see the earbuds’ touch panel blinks altering red & green light for a few seconds.
3. Close the lid of powercase and re-open it after a minute. Take out the airdopes as the resetting process is done.
4. Connect the earbuds to your smartphone and start using them normally.
Steps to Reset boAt Airdopes 621
1. Keep the earbuds in pairing mode and place them inside the charging case.
2. Long press the capacitive touch control (CTC) of both earbuds for 10 seconds. This should blink a green light on the airdopes for 3 seconds.
3. If so, you have reset airdopes 621 the right way. Boat Airdopes factory reset is complete.
4. Close the lid of the power case & reopen it later. Try connecting the airdopes & streaming music or take calls.
Reset boAt Airdopes 171 the Right Way
1. Ensure that no device is paired with your boAt 171.
2. Take the earbuds in your hands (one earbud in one hand). Now, long press both the earbuds’ CTC for nearly 10 seconds. Do it for both airdopes at the same time. You will see red & green light emitting from the earbuds.
3. As a next step, place the earbuds back inside the charging case. Close the lid & re-open after some time.
4. Congrats! You have successfully reset your Airdopes 171!
How to Reset boAt Airdopes 501 ANC?
1. First of all, disconnect the earbuds from all devices & keep it in pairing mode. You will need to have your power case charged by at least 10% for the reset process.
2. Place both the airdopes 501 ANC inside the case. Don’t close the lid.
3. In the power case, you will see a button dedicated for the reset. Press the reset button for 10 seconds.
4. The LED of the case will blink (white in color). This indicates that the reset process has been completed.
5. Now just close the lid and re-open it after some time. Reconnect the Airdopes 501 ANC to your smartphone & try playing any track for confirmation.
Conclusion
In this article we have covered the resetting process of the top five boAt airdopes. If you own anyone among these, you might have your earbuds reset by now.
If you have a different boAt airdopes model (like boAt 131, 111, 181 or so…), you can follow the above steps one-by-one & see if it works. If not, you may need to refer to the user-manual to find the exact reset procedure.
